Frost King AC5H Outside Window Air Conditioner Cover, 20 x 28 x 30-InchFrost King outside covers for window air conditioners help protect your expensive unit from damage caused by harsh winter weather.
Keep that condensate out of your atmosphere with this Little Giant VCMA-15UL Series 1/50 HP Condensate Removal Pump. For removal of condensate air from air conditioners, gas furnaces, and condensing boilers, this 1/50 HP pump gets the job done. It has a half gallon ABS tank, motor cover, volute, stainless steel shaft, and a snap-action switch.It features 3 inlet drain holes and thermal overload protection. Rid of the condensate in your life with this Little Giant VCMA-15UL Series 1/50 HP Condensate Removal Pump. VCMA-15 Series condensate removal pump For removal of condensate from an air conditioner, suitable for high efficiency, gas furnace condensation, and condensing boilers 1/50 HP high performance motor ABS tank, motor cover, and volute 1/2 gallon tank capacity Stainless steel shaft Snap-action switch Removable 0.38-inch (9.5 mm) barbed check valve 3 inlet drain holes Thermal overload protection cCSAus Specifications: Model: VCMA-15UL Volts: 115 Cord: 6 feet Capacity: 65 gph @ 1-foot Product warranty: 1-year warranty
1 Buy = 2 C.A.P. TMP-1 Temperature Controllers! The TMP-1 allows you to control the temperature within your growing environment. Just connect your air conditioner or fan, then set the temperature that you wish to maintain. If that temperature is exceeded, the outlet turns on your equipment until the temperature decreases below the set temperature by 5 degrees. Comes with a 3' remote sensor. The TMP-1 is rated for 15 amps @ 120 volts. The TMP-1 is extremely easy to use. Once connected, the temperature will be maintained at the level you set. Plug your exhaust fan or A/C into the outlet on the front face. Plug the TMP-1 into a standard 15 amp, 120 volt outlet. The TMP-1 can be secured to the receptacle it is plugged into by using the supplied screw in place of the standard receptacle cover-plate screw. Adjust the TMP-1 by using the large knob on the front of the unit. When the temperature rises to the preset level, the cooling device plugged into the TMP-1 will be energized. The TMP-1 will turn OFF the cooling device after the temperature has been reduced by approximately 5° F. VMInnovations is an authorized C.A.P. dealer that sells new, warranted products! (2) New C.A.P TMP-1 Cooling Temperature Controllers! The TMP-1 controls (lowers) temperature by turning on an exhaust fan The external temperature probe is highly accurate & reliable The TMP-1 is extremely affordable way to control the temperature in your growing environment Precautions: Do not expose the TMP-1 to water. Electrical shock may occur. Do not kink the capillary tubing! Your temperature will not read correctly. Do not open the TMP-1. There are no user serviceable parts inside. Specifications: Main power voltage: 120 volts Maximum amperage: 15 amps Temperature control range: 50-115° F Temperature operating range: 32-120° F Relay operating life: 100,000 electrical Product Condition: Brand New Part Number: TMP-1 4 Year Warranty: (3 Year Manufacturer Warranty + 1 Year VMInnovations Warranty)