Saratoga Swing SetUpper deck with wood roof//Lower clubhouse with wood door and window mutton bars//Covered picnic table//8' speedy slide//Two belt swings, two person glider//This item comes pre stained but will still need to be coated with a sealant protection//Frame M...
Akfix 840P is a self-extinguishable aerosol polyurethane foam for filling, sealing and bonding gaps. 840 p is a PU foam used with an applicator gun (not included) and features higher yield, easier application and reusability. Seal electrical runs and service penetrations, ductwork, wire passages, electrical outlets, etc. Easy to identify orange color. Rated B2 according to DIN 4102. Excellent adhesion to most building materials. 840P does not contain any propellant gases that are harmful to the ozone layer. It can be painted after curing. It can be cut and sawn. UL classified. Download attached data sheets for more information. Click on the Akfix link at the top of this page to learn more about Akfix and discover other Akfix products.
It's easy to form durable, airtight, water-resistant bonds to vinyl, wood and metal frames. This one-component, minimal-expanding, low pressure-build, flexible polyurethane foam is exclusively formulated to air seal the gap between a window or door frame and its rough opening. The foam expands only enough to generate an effective seal. When applied properly, Dow GREAT STUFF PRO Window & Door 187273 is proven not to distort or bow window and door frames. GREAT STUFF PRO Window & Door Insulating Foam Sealant is designed to form a durable, airtight, water-resistant bond to vinyl, wood and metal surfaces. Its foam skin repels and deflects water, which can help reduce the potential for moisture damage in frame openings. The straw foam Great stuff loses between 10 to 15% of its Yield through the straw, whereas the Pro Gun draws every bit of foam from the can and is much quicker on the job. Time and Yield are essential ingredients for profit. GREAT STUFF PRO Window & Door Insulating Foam Sealant is available in gun- and straw-applied versions. This listing is for the gun-applied version. Application GREAT STUFF PRO Window & Door should be applied at temperatures between 40°F and 100°F (4°C and 38°C) at relative humidity > 20 percent. Surface where applied should be free of dust, grease, oil, wax and release agents. Damp surfaces will not impair the bond.